Description
Achieve pristine swimming pool water with ease using the 12-in-1 Swimming Pool Test Kit. This simple, single-dip kit tests for 12 key parameters simultaneously. With 10 test strips included, you can quickly and accurately check your pool and spa water quality in under 60 seconds, without any messy chemicals. Ensure your water is always safe and clean. Our test kit covers the following parameters:
1. pH
2. Total alkalinity
3. Hardness
4. Cyanuric acid
5. Bromine
6. Free Chlorine
7. Total chlorine
8. Ammonium Chloride
9. Nitrate
10. Nitrite
11. Iodine
12. Hydrogen Peroxide
Swimming Pool Test Kit Instruction
TheSwimming Pool Test Kit is easy to use, and you get your results fast. To get your Pool & Spa water quality results to follow the test kit instructions below.
- Open the package, remove one strip from the packaging and dip into water for a few seconds.
- Remove and wait for 60 seconds holding the test strip horizontally. There is no need to remove excess water.
- Once you have your water quality results appear, compare each parameter with the colour chart on the packaging's rear to get your results.
- Be mindful that pH test results are displayed on two lines.
- If you find that the results are not up to scratch consult your local water quality specialist or local council for a solution.
General Product Information
- When ready to test your water quality, remove the container's strip and replace the cap tightly.
- Store at room temperature and keep away from UV rays and to not expose the container to moisture.
- Please do not remove the test strip from the container unless you intend on using it.
- Keep out of reach from children and refer to the packaging for the used by date.
Store this test kit in a cool, dry place. Exposure to sunlight and moisture will degrade the test pads.
For more information on the 12 in 1 Swimming Pool Test Kit, visit our Frequently Asked Questions Page: Water Test Kit FAQ's
